Quingo Flyte Owner's And Service Manual
                                                                              | |
Contents
| 
21Battery ChargingConnection InstructionsWhen your new Flyte is delivered theinstalled batteries will be partially charged.Fully charge before use.1. Place your scooter in an area that isdry and well ventilated. Make sure apower point is nearby.2. The scooter should be switched off andthe key removed.3. Turn off the mains switch. Neverconnect or disconnect the charger withthe mains turned on.4. Connect the charger to the chargingsocket on the tiller (see photograph 1)5. Once the charger is connected, switchon the mains.6. The power-on lamp illuminates redwhen switched on. The charger lampstarts yellow, changes to green whencharged. (charge for the full duration 8-12 hours).7. Switch off the mains and remove theplug from the battery when fullycharged. Do not leave the chargerplugged in with the power off. Thiswill discharge your battery.CORRECT CHARGING PROLONGSBATTERY LIFE.Battery Charger styles can change. If youare not sure of the charging procedureplease contact your service provider.Mains connectorOn (I) off (O) switchRED = Power on YELLOW = ChargingGREEN = Fully Charged1 . |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine