© Copyright Qvis Ⓡ All software and documentation rights reserved.39After you set these parameters, please click ‘Save’ and the device willreboot to make the parameters valid.7.5.2 LAN SettingSee Figure 21 for the ‘LAN setting’ interface:Figure 24[DHCP Enable]: If the DHCP function of the router is enabled, the IPcamera will automatically seek an IP address from therouter.[IP]: Set the camera’s IP address.[Subnet mask]: Default value is 255.255.255.0 (users arerecommended not to change it).[Gateway]: Set the gateway IP of the camera, for example whenthe device is connected to public network via a router,the gateway IP is the router IP.[DNS]: Please use DDNS function to set the DNS addressas the local DNS address. If you do not know the localDNS, you can use 8.8.8.8.[MAC]: The Physical address of the IP camera (users arerecommended not to change it).
