Qvis MINI-PTZ-23X-H User Manual

Contents

Qvis MINI-PTZ-23X-H User Manual Manual pdf 14 page image

7ADDR ： 001-HBAUD RATE ：9600PARITY ：NONESOFTWARE ：V1.03.0.RHAJDVBACK EXIT2.4.1.1 System informationMove the cursor to SYSTEM INFORMATION and then click the confirm button, you will see the above interface.Here you can view the dome’s basic information.2.4.1.2 Address InformationMove the cursor to SITE INFORMATION and then click confirm button. ADDR TYPE: There are two options: soft and hard. Please use the left/right button on the keyboard or in thespeed dome terminal menu to set. Please click the OK button to confirm ADDR-HARD: It is an address you can set in the dial switch. You cannot modify it through the software. ADDR-SOFT: You can set address via software. It is to say, you can use menu to modify dome address.The value ranges from 0 to 255. BACK: Go back to the previous menu. EXIT: Log out system menu.2.4.2 Display SettingMove the cursor to DISPLAY SETUP and then click confirm button, you can go to the third submenu. Please usethe left/right button on the keyboard or in the speed dome terminal menu to set. After completing the setup,please click the save button to save current setup. PRESET TITLE: Display dome preset title or not. Please use the left/right button on the keyboard or in thespeed dome terminal menu to set. You can go to Function Setup->Preset section to set correspondingpreset value and preset title.ADDR TYPE ：HARDADDR-HARD ：1ADDR-SOFT ：0BACK EXITPRESET ：ONAZIMUTH DISP ：ONPOSITION ：OFFZOOM DISP ：OFFINSIDE TEMP ：OFFTITLE DISP ：OFFBACK EXIT