R82 Cougar User Manual
Also see for Cougar: Mounting instructionsMounting instructionMounting instructionMounting instructionMounting instruction
                                            | |
Contents
| 
17AC CBDDAGBSEAT HEIGHTADJUSTMENTFollow the directions below to adjust the seatheight of the Cougar:1) Undo the nuts (A) and remove the bolt fromthe frame.2) Adjust the height to the required position.3) Replace the bolt and fasten the nuts.Make sure that the seat height is the sameat both sides of the frame.Please be aware that the angle of the seatchanges as the seat height is adjusted.The user must not be in the chair while theheight adjustment is made.ADJUSTMENT OFTHE SLIDE BARFUNCTIONRelease the gas spring on the back of the chair byactivating the right handle (A) on the push brace.Pull the seat all the way back to obtain the cor-rect starting position for adjustment.Follow the description below to adjust the slidebar function:1) Remove the lower part of the gas spring (B).2) Loosen the screws (C) beneath the seat andadjust to the required position. Fasten thescrews.3) Loosen the screws (D). Adjust the height ofthe bar on the back to be able to replace thelower part of the gas spring. Then tighten thescrews.Please ensure that the fitting beneath the seatis the same on both sides of the frame.The height of the bar must be the same onboth sides of the chair.The user must not be in the chair while theseat angle adjustment is made.GBGB |
Related manuals for R82 Cougar
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine