R82 Cougar User Manual

Also see for Cougar: Mounting instructions Mounting instruction Mounting instruction Mounting instruction Mounting instruction

R82 Cougar User Manual Manual pdf 22 page image

22ABCEADFGBCOUGAR BACKThe Cougar may be purchased with either awooden back, strap back or manufactured fora special back system.Back with a wooden plate:The wooden plate is mounted in the rails on theback.Strap back:The strap back is mounted in the rails on theback. The straps can be adjusted to obtain e.g.more or less lumber support. The straps areequipped with velco (A) to aid the adjustment.Prepared for foreign back:The Cougar can be manufactured for specialbacks from other manufactureres to be instal-led. The "special" back and its fittings can bemounted on the round tubes in the back. Fol-low the instructions which is included with the"special" back.GBMUDGUARDMudguards can be mounted on the Cougar.Follow the description below to mount the mud-guards correctly:1) Mount the fitting for the mudguards in theplastic fitting on the rear part of the frame(A). Remove the two screws and mount theenclosed bushings (B).2) Then mount the fitting (C) using the enclosedspring washer and bolts (D). Use the 5 mmAllen key.3) Finally place the mudguards (E) in the fittings.Bolts, washers and nuts (F) are pulled as farup the rails as possible and tightened.On some adjustments of the chair it mightbe an advantage to mount the mudguardon the other side of the fitting.GB