R82 Quokka User Manual
                                                                    | |
INSTALLATION FOR CHILDREN 2.3-18 kg (5-39.6 lbs.)REAR FACINGLATCH ONLY• Figure A illustrates a rear-facing lowerLATCH installation.• Verify that your vehicle is equippedwith LATCH anchors. If LATCH anchorsare not available, you MUST use thevehicle belt installation methods oruse an alternative seating location.1. Press and hold the lower connectorstrap adjuster release button, then pullthe lower connector strap to full length.2. Place the child restraint in the rear-facing position on the vehicle seat.Recline the child restraint by using thealignment sticker located on bothsides of the restraint. Align the blackline parallel to the ground (Fig. B).• This child restraint MUST be in thereclined position when installed rearfacing.3. Attach one lower connector to itsadjacent vehicle LATCH anchor (Fig. C).• The lower connector MUST be attachedover the LATCH anchor.• Pull on the connector to confirmattachment. Aclick confirms theLATCH is secured.TIP: You may need to turn the front of thechild restraint toward you for easier accessto the vehicle LATCH anchor.4. Route the lower connector strap acrossthe child restraint passing through therear facing belt path. (Fig. D)• The lower connector strap MUST berouted under cover and passed throughthe rear facing belt guides on bothsides.11 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine