R82 combi frame User Manual

Also see for combi frame: Mounting instruction Mounting instruction

Contents

R82 combi frame User Manual Manual pdf 17 page image

17BAABGBSEAT HEIGHTADJUSTMENTFollow the directions below to adjust the seatheight of the Combi Frame:* Remove the bolts (A) from the frame.* Adjust the height to the required position.* Replace the bolt and fasten.Make sure that the seat height is the sameat both sides of the frame.Be aware that the seat angle will changewhen adjusting the seat height.The user must not be in the chair while theheight adjustment is made.GBGB SEAT ANGLEADJUSTMENTPush the seat plate down to the horizontal po-sition to compress the gas spring to give thecorrect starting angle.* Demount the mounting holding the gas springunder the seat, by loosening the 2 screws(A).* Remount the mounting in the holes giving therequired seat angle.* Retighten the screws A).* Loosen the 2 screws (B) in each side with a6mm allen key.* Push the seat back to the starting point.* Tighten the 2 screws (B) in each side.