R82 combi frame User Manual

Also see for combi frame: Mounting instruction Mounting instruction

Contents

R82 combi frame User Manual Manual pdf 22 page image

22ABABGBGB HEAD SUPPORTFITTINGMount the head support fitting on the gasspringfitting on the back.* Remove the four screws (A) from the fitting* Place the head support fitting (B) and fastenwith the new longer screws. Remember thedistance bush between the 2 mountings.Your head support can now be mounted in thefitting. Fasten with an Allen key.GB HEAD SUPPORTFITTING ON CROSSBARMount a cross bar with a head support fittingmounted.* Remove the top parts (A) from the back railsusing a screwdriver.* Mount the cross bar in the rails and fasten inthe desired height with a 5 mm allen key.Your head support can now be mounted in thefitting. Fasten with the fingerscrew (B).Make sure that the bar is straight by mea-suring the distance on each side to the topof the bearer.