5.5.2. InterfacePortPort settingsFig. 5.19: Menu Switch settings / PortPhyter is responsible for Ethernet signal conversion between wire (e.g. CAT7 cable) and internal switchbus.Port name Identification of the internal switch port. The switch ports are connected to an ex-ternal port or to an internal device (radio modem, management CPU).The external port (with RJ45 interface) labeled "ETH1+POE". Port 2.The external port (with SFP interface) labeled "ETH2". Port 4.Eth1Eth2Link status Ethernet link status can beno link signal detecteddown / typelink signal detectedup / typeThe type of the physical layer is indicated after the slashmetallic Ethernet interfacecopperSFP module can be either optic or metallicSFPSpeed / duplex Ethernet link Speed and duplex.10/100/1000 MbpsSpeedRAy3 Microwave Link – © RACOM s.r.o.106Configuration
