3.1.6. WiFi settingsMenu Link / Service access / USB accessoriesGo to menu Link Settings / Service Access / USB accessoriesand enter WiFi password or disableWiFi completely. Standard settings are that Enable on Air link loss is ON (when the link is down, WiFiis activated; when link is OK, WiFi will be deactivated in few minutes) and Force Enable is OFF (activatesWiFi permanently). Passphrase has to be set, otherwise the WiFi is unsecured and system warning isactive.Fig. 3.7: Configuration menu Link settings / Service access / USB accessoriesNoteIf you access the unit over WiFi, do this step as last action before reboot (as the WiFi con-nection will be interrupted and new connection with new password would be required tocontinue the work).For full explanation of possibilities of this screen see the section called “USB accessories”.RAy3 Microwave Link – © RACOM s.r.o.50Step-by-step Guide
