8317. UNDER HOOK WEIGHINGIn standard analytical and precision balances loads can be weighed under theweighing pan. Such means of operation requires placing a balance on a upliftedposition. RADWAG offers a rack for under hook weighing. The rack is an optionalequipment offered for balances PS series.For under hook weighing follow below procedure:• Remove plastic hole plug in basis of a balance;• There is suspension place for hook visible in the hole– the suspension isinstalled permanently to balance mechanism;• In the hole install the hook for under hook weighing- the hook is standardequipment of a balance. Weigh loads using under hook option;• As under hook weighing is finished, close the hole in balance basiswith plastic hole plug.CAUTION:The suspension for hook must not be turned, twisted or manipulatedin any direction. Such actions may cause damage to balancemechanism.Mass of all additional elements of under hook weighing kit, like: the hook,weighing pan, string, etc. should be zeroed by pressing Esc/TARE key.
