88APPENDIX AProgramming of bar code scanner (description for users Power ScanQS6000+).Programming means reading appropriate codes in appropriate order from bookattached to scanner „Programming Guide”.Way of operating is described in „Programming Guide” attached to scanner.Speed of transmission RS 232 in scanner is default set on 9600 b/sec. Ifchange is necessary , program the scanner in appropriate way.1. Programming the type of reading by scanner barcodeSymbology SelectionSETEnable EAN-13 (type of code at choice)END2. Setting the prefix for WLT balanceLabel Transmit Configuration, Settings Global Prefix(es)SETSet Prefix01END3. Setting the suffix for WLT balanceLabel Transmit Configuration, Setting Global Suffix(es)SETSet SuffixCREND4. Setting label ID locationSETLABEL I.D. = NONEENDNotice:RADWAG standard is – no symbology sign in the frame (pure code)(Symbology specification – LABEL I.D. = NONE)
