RAIS VISIO 3-1 NS User Manual

RAIS VISIO 3-1 NS User Manual Manual pdf 28 page image

2828Maintenance/Replacement PartsEspecially moveable parts are worn down by frequent use. Door seals also becomeworn. Only use original spare parts.We recommend service performed by your dealer aftercompletion of a heating period.Combustion chamber liningThe combustion chamber lining protects the body of the wood burning stove againstthe heat from the fire. the large temperature fluctuations may result in cracks in theplates of the combustion chamber lining, which, however do not affect the functionalcapacity of the stove. They do not need to be replaced unless long-term use causesthem to crumble.The plates of the combustion chamber lining are only inserting into the stove, and canbe easily replaced by your dealer or yourself.Moving partsDoor hinges and door lock should be lubricated when needed. We recommend to useonly our lubricating spray, as the use of other products can lead to the formation ofodours and residues. Contact your dealer to obtain the lubricant.Cleaning and careWood stove and chimney must be inspected by a chimney sweep annually. Duringcleaning and care, the stove must be cold.If the glass is sooty:• Clean the glass regularly and only when the stove is cold, otherwise the soot willburn solid.• Dampen a piece of paper or newspaper, dip it in the ashes and rub the sooty glass.• Rub with a piece of paper and glass becomes clean.• Alternatively use glass polish, which can buy from you RAIS distributor.Clean the exterior with a soft dry cloth or soft brush.Prior to a new heating season, it should always be checked that the chimney andsmoke gas connector are not blocked.Inspect the stove interior and exterior for damage, especially seals and the heat insulat-ing plates (vermiculite).English RAIS/attika - User manual for VISIO 3-1