RAM TRUCK 1500 2010 User Manual

Also see for 2010 TRUCK 3500: Owner's manual Owner's manual supplement User guide Owner's manual Owner's manual

Contents

RAM TRUCK 1500 2010 User Manual Manual pdf 12 page image

• LATCH equipped seating positions have both lower anchor bars, located at the back ofthe seat cushion, and tether strap anchorages, located behind the seat back.Installing The Lower Attachments:• The vehicle lower anchorages are round bars located at the rear of the seat cushionwhere it meets the seatback.• Loosen the adjusters on the lower strapsand on the tether strap so that you can moreeasily attach the hooks or connectors to thevehicle anchors.• Attach the lower hooks or connectors overthe top of the seatcover material.• Then tighten the straps as you push thechild restraint rearward and downward intothe seat.Installing The Top Tether Strap (With Either Lower Anchors Or Vehicle SeatBelt) - Regular Cab - Front Seat:• Place the child restraint on the seat and adjust the tether strap so that it will reachover the seat back under the head restraint to the tether anchor directly behind theseat.• Lift the cover (if so equipped), and attachthe hook to the square opening in the sheetmetal.• Install the child restraint and remove theslack in the tether strap according to themanufacturer's instructions.Installing The Top Tether Strap (With Either Lower Anchors Or Vehicle SeatBelt) - Quad Cab ®/Crew Cab/Mega Cab ® - Rear Seats:• Obtain tether straps by raising the head restraints and reaching between the rearglass and rear seat. The tether strap may be retained with an elastic band.Accessibility to the tether strap is greatly improved by raising the seat cushion to the“up” position. Remove the elastic before use.• Place a child restraint on each outboard rear seat and adjust the tether strap so that itwill reach under the head restraint to the tether anchor directly behind the seat andthen to the anchor directly behind the center rear seat.• Pass each tether strap hook under the head restraint and through the loop of webbingbehind the child seat.• Route each tether strap to the anchor behind the center seat, and attach the hooks tothe metal ring.GETTING STARTED10