RC4 RC4Magic Series 3 DMXio User Manual
                    | |
Contents
| 
RC4Magic Series 3 DMXio User ManualPage 12RF Power/RSSI - RedIn transmitter mode, this LED indicates the strength of the RF signal. It blinks faster withhigher power levels.In receiver mode, this LED is a receive signal strength indicator (RSSI). Faster blinkingindicates a stronger more robust signal.DMX Channel Range Limit - YellowIf the range of transmit channels has been reduced (Transmit Low Channel is higher than 1,or Transmit High Channel is lower than 512) then this indicator is on. This is a warning thatnot all channels are being transmitted.DMX Termination - GreenIf DMX termination is enabled, this indicator is on and an internal terminator is applied tothe XLR connections.RF Connect - BlueIn transmitter mode, this indicator blinks slowly when a private local-area wireless networkis established.In receiver mode, this LED is solidly lit (no blinking) while it searches for a transmitter onthe associated RC4 System ID. When a valid transmitter is found and a private local-areawireless network is established, this LED blinks at double the speed of the transmitter LED.If no valid data is received from the transmitter for several seconds, the receiver radio is resetand this LED reverts to being solidly on. It then remains on until a valid transmitter is foundagain. This sequence of events is what occurs if a transmitter is turned off and on and locatesitself on a different RF channel. |
Related manuals for RC4 RC4Magic Series 3 DMXio
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine