Manuals database logo
manualsdatabase
Your AI-powered manual search engine

RC4 RC4Magic Series 3 DMXio User Manual

Page 1 preview
Page 2 preview
Page 3 preview
Page 4 preview
Page 5 preview
Page 6 preview
Page 7 preview
Page 8 preview
Page 9 preview
Page 10 preview
Page 11 preview
Page 12 preview
Page 13 preview
Page 14 preview
Page 15 preview
Page 16 preview
Page 17 preview
Page 18 preview
Page 19 preview
Page 20 preview
Contents
  1. Disclaimers
  2. Table Of Contents
  3. Table Of Contents
  4. Harmonized Design for a World of Choices
  5. RC4Magic DMXio Wireless DMX Transceiver
  6. RF Channels and Power-Up Scanning
  7. DMX Termination
  8. power requirements
  9. led indicators
  10. COP/RX/TX - Green
  11. RF Power/RSSI - Red
  12. Selected ID Indication
  13. ID3 Public
  14. RX/TX (Receive/Transmit Mode)
  15. Func/Shift Two-Button Functions
  16. Manufacturer's Warranty
  17. Transmitter Mode
  18. RC4Magic RF Specifications
  19. How to Reach RC4 Wireless
RC4 RC4Magic Series 3 DMXio User Manual Manual pdf 18 page image
RC4Magic Series 3 DMXio User ManualPage 18RC4Magic Series 3 DMXio Device Specifications Dimensions: 3.4” x 2.3” x 1.55” nominal (approx. 86mm x 59mm x 40mm)Mounting flanges extend an additional 0.5″ (13mm), for a bottom footprint of 4.4″x 2.3″ (112mm x 59mm) DMX Connections: 5-pin male and female XLRs for DMX in and out,internally wired together Power Input: 6VDC – 35VDC, 0.4WStandard 2.1mm power receptacle, center positiveInternal jumper option to take power from XLR pins 4 and 5 3 user-selectable RC4 Private System IDs, plus the RC4Magic Public ID(each ID supports one independent DMX universe) User selectable Transmit or Receive modes (press one button to toggle). User selectable internal DMX termination (press one button to toggle on/off).Transmitter Mode Only 1 transmitter device should be operated on any single RC4MagicSystem ID.Transmitter devices include DMXio and RC4MagicPC Remote Control Dongle. DMX Input: meets USITT DMX512/1990(4us) with 1-second data hold afterdropout. Straight-thru hardware connection from DMX input to output for easypass-through to additional DMX devices. DMX Channel Limiting: Set lowest and highest DMX channel using RC4OneTouch (default is full 512-channel universe)Receiver Mode Any number of DMXio receivers may be used in a system. DMX Output: meets USITT DMX512/1990. The DMX specification allows up to 32 devices on a DMX output. The DMXio dataoutput exceeds this requirement and is capable of driving additional devices. Internally protected against static discharge and excessive line loading.RC4Magic DMX Protocol Compliance DMX inputs and outputs comply with USITT DMX512/1990(4us). Packets with non-zero start codes are not transmitted; RC4Magic cannot transferproprietary data or RDM packets. DMXio receiver output replicates DMXio transmitter input, providing the samenumber of DMX channels and the same number of packets per second (pps).
/ 20
Related manuals for RC4 RC4Magic Series 3 DMXio
RC4 LumenDimMIO-100 Quick Start Manual first page preview
RC4 LumenDimMIO-100 Quick Start Manual
This manual is suitable for:
RC4Magic Series 3 DMXio
Manuals database logo
manualsdatabase
Your AI-powered manual search engine