RCA 20F502TDV User Manual

Contents

67No reception abovechannel 13.Problems and troubleshootingUse the following check list for troubleshooting when you have problems with your TV/VCR/DVD. Consult yourlocal dealer or service outlet if problems persist.Be sure all connections are properly made when using with other units.SYMPTOMS CAUSE POSSIBLE SOLUTIONS PAGETry another channel.Check picture control adjustments.Check for source of reception distur-bance.Check CABLE connection or VHF/UHFantenna, reposition or rotate antenna.Try another channel.Check picture control adjustments.Check for source of reception disturbance.Check CABLE connection or VHF/UHFantenna, reposition or rotate antenna.Try another channel.Check CABLE connection or VHF/UHFantenna, reposition or rotate antenna.Try another channel.Check all CABLE connections.Set the TV/CABLE menu option to theCABLE mode.Contact your Cable TV company.Make sure TV/CABLE menu option is inthe appropriate mode.Check UHF antenna.Try another channel.Check CABLE connection or VHF/UHFantenna, reposition or rotate antenna.Check for source of reception disturbance.Check the MUTE button has not beenpressed.Tune new channel.Set Sleep Timer to “0”.Try another channel.Check CABLE connection of VHF/UHFantenna, reposition or rotate antenna.Press the CLOSED CAPTION button toturn on the closed caption.TV station experiencing problems.Picture control is not adjusted.Possible local interference.Antenna (CABLE) connector is not connectedor possible local interference.TV station experiencing problems.Picture control is not adjusted.Possible local interference.Antenna (CABLE) connector is not connectedor possible local interference.TV station experiencing problems.Antenna (CABLE) connector is not connectedor possible local interference.Cable TV channel is scrambled.CABLE connector is not connected.TV/CABLE Mode menu option is set to theTV mode.Cable TV service interrupted.TV/CABLE Mode menu option is not set tothe appropriate mode.UHF antenna is not connected.TV station experiencing problems.Antenna (CABLE) connector is not connectedor possible local interference.Possible local interference.The MUTE button is depressed.Cassette or disc is not inserted.The TIMER REC buttons are depressed.No power.Closed caption is notactivated.TV shuts off.Poor or no picture.Poor or no sound .No Cable TV reception.Picture wobbles or drifts.Poor or no color.Although the power is on, theTV/VCR/DVD does not operate.Connect the AC power cord to the ACoutlet.Insert a video cassette or disc.Press the TIMER REC buttons.POWERTV BROADCAST RECEPTION534, 46411929–11, 121929–11, 121911, 121912221222111911, 12–2019201911, 1221The video cassette's erase prevention tabis broken off.The time is not set correctly.The recording start/end time is not setcorrectly.Tape is old or worn.Tracking adjustment is beyond range ofautomatic tracking circuit.Video heads are dirty.Timer recording does notwork.TV recording does not work. Place a piece of adhesive tape over thehole.Reset the present time.Reset the start/end time.Replace the tape.Adjust tracking manually using theTRACKING +/– buttons on the remote control.Clean the video heads.3416~184168VCRThe CLOSED CAPTION button is notdepressed.TV signal is weak.TV station experiencing problems or programtuned is not closed captions.Sleep timer is set.TV station stopped broadcasting.Noise bars appear on thescreen.–36The AC power cord is not connected.