RCA 20F650TECY User Manual
                                | |
Contents
| 
Usin 9 the Remote ControlREVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, providestransport control for some remote-controllable VCRs or DVD players,SEARCH In VCR mode, accesses Index Search feature.SPEED In VCR mode, selects a recording speed.VCR Puts the remote in VCR mode and, if auto tuning is enabled, will turn on theTV and tune to the correct video input channelZOOM In DVD mode, zooms in on the picture.Using the INPUT ButtonUse the INPUT button to scroll through the available video input channels andview components you have connected to the I!/.1 Make sure the component you want to view is turned ON.2. Press INPUT to tune to an available video input source and view thecomponent.3 To return to the previous channel, continue pressing IN PUT.VCR buttonsREVERSE /and PLAYbuttons_ _ D _ON,OFFProgramming the Remote to Operate OtherComponentsThe universal remote can be programmed to operate mostbrands of remote controllable components. The remote isalready programmed to operate most RCA, GE, and Proseancomponents.Nole TheTVbutton con'l beprogrdrnmcd on ibis remolcFind Out If You Need to Program the RemoteTo determine whether the universal remote needs to beprogrammed for your component, turn the component ON.For example, to program the remote for a VCR, turn on theVCR. Point the remote at the VCR, and press the VCR button.Then press ONoOFF or CH t- {channel up) or CH - {channeldown) to see if the VCR responds to the remote commands. Ifthe component does not respond, the remote needs to beprogrammed.Programming the RemoteSTOPbutton There are two ways to program the remote eontrohYou'll use these butto_ls whellprogramming file remote.• automatic code search• direct entryChapter 2 Graphics contained within this publication are for representation onl}4 9 |
Related manuals for RCA 20F410TECX
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine