RCA 20F650TECY User Manual

Contents

RCA 20F650TECY User Manual Manual pdf 27 page image

TroubleshootingMost problems you encounter with your TV can be corrected by consulting the followingtroubleshooting list,Nolo: If you pmh,r, we con provide you wilh the nerne of on Aulhorized Service Representative who w_ll visit your homefbr _ _e _ /ns_offyour dectron_ enlertd/nment s_m and lo inslruct you in/_s opero_on For deta_ about thfsservice, c_fl 1-888 206 3359¸ For oddtdonal ossislance while using your RCA p_d_ct, p/ease vfs/t wwv_rca com/cuslomersupRorLTV ProblemsTV won't turn on• Press the TVbutton.• Make sure the TVis plugged in.• Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else.• Something might be wrong with your remote control. Press the POWERbutton on the front of the TV. Ifthe TV turns on, check the remote control solutions on page 26.• The front panel controls may be locked [disabled}. Use the remote control to unlock the front panelcontrols by selecting the Lock F_ P_mel in the PARENTALCONTROLmenu and press OK [box won't havecheck mark).Buttons don't work• If you're using the remote control, press the TV button first to make sure the remote is in qv mode.• The front panel controls may be _ocked {disabled). Use the remote contro_ to unlock the front panelcontrols by selecting the Lock F_ P_inel in the PARENTALCONTROLmenu and press OK (box won't havecheck mark).• Unplug the rv for two minutes and then plug it back in. Turn the FVon and try again.TV turns off unexpectedly• Sleep timer might have been activated. Go to page 24 for instructions.• KidPass might have been activated. Go to page 21 for instructions.• Wake-Up timer turned on the TV and no remote or front panel buttons were pressed for two hours.• Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and thenturn on again. If this happens frequently, the voltage in your house may be abnormally high or low.• Unplug R/. Wait five minutes. Plug it in again.TV turns on unexpectedly• Wake-Up timer might have been activated. Go to page 24 for instructions.• You might have pressed CH+, CH- or OK on the remote accidentally.Blank screen• Make sure the component connected to the TV is turned on.• Try another channel.No sound, picture okay• Maybe the sound is muted. Try pressing the volume up button to restore sound.• If using S-Video, remember to also connect the component's left and right audio output jacks to the TV'sAUDIO jacks.Can't select certain channel• Channel may be blocked or not approved through the V-Chip.Chapter 5 Graphics contained within this publication ere for representation onlg 2 5