RCA 24V510T User Manual

Also see for 24F530T: Specification sheet User guide

Contents

10 Chapter 2Using the Remote ControlDVD Turns on a compatible RCA, GE, or Proscan DVD player and sets the remote to control the DVDplayer. Also used with the ON•OFF button to turn on other compatible DVD players.GUIDE If you’re operating another component that has an electronic program guide, this buttonaccesses the on-screen Guide. Also operates the disc menu for some compatible RCA, GE, and ProscanDVD players.OPEN•CLOSE In DVD mode, opens or closes the DVD disc tray for some compatible RCA, GE, andProscan DVD players.REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE If programmed, provides transport control forsome compatible remote-controllable VCRs or DVD players.SEARCH In VCR mode, accesses Index Search feature for some compatible RCA, GE, and Proscan VCRs.SPEED In VCR mode, selects a recording speed for some compatible RCA, GE, and Proscan VCRs.VCR Turns on a compatible RCA, GE, or Proscan VCR and sets the remote to control the VCR. Also usedwith the ON•OFF button to turn on other compatible VCRs.ZOOM In DVD mode, zooms in on the picture for some compatible RCA, GE, and Proscan DVD players.Using the INPUT ButtonUse the INPUT button to scroll through the available Video Input Channels so you can view contentcoming from components you have connected to the TV.1. Make sure the component you want to view is turned ON.2. Press INPUT to tune to an available video input source and view the component.3. To return to the previous channel, continue pressing INPUT.Programming the Remote to Operate OtherComponentsThe universal remote can be programmed to operate somebrands of remote controllable VCRs and DVD players. Theremote is already programmed to operate most RCA, GE, andProscan VCRs and DVD players.Note: The TV button can’t be programmed on this remote.Find Out If You Need to Program the RemoteTo determine whether the universal remote needs to beprogrammed for your VCR or DVD player, turn on thecomponent. For example, to program the remote for a VCR,turn on the VCR. Point the remote at the VCR, and press theVCR button. Then press ON•OFF or CH + (channel up) or CH –(channel down) to see if the VCR responds to the remotecommands. If the component does not respond, the remoteneeds to be programmed.Programming the RemoteThere are two ways to program the remote control:• automatic code search• direct entryDVD ON OFFVCR TVVOLMUTE GO BACKCHCLEAR MENUPRESETSCCGUIDEINFOSKIP1 2 34 5 67 8 90INPUT ANTENNAREVERSE PLAY FORWARDRECORD STOP PAUSEAGAIN ZOOM OPEN CLOSESPEED SEARCHOKOKDVD andVCR buttonsON•OFFbutton