Explanation of JacksThis section describes the jacks you can use to make connections. There are severalcombinations available to connect devices to your TV.ANTENNA/CABLE INPUT Connect either antenna or cable via coaxial (RF) cable to receiveanalog and digital channels through your cable provider. Receive off-air analog and digitalchannels via an antenna. Refer to page 5 for more details.COMPOSITE(VID) INPUTCOMPONENT(CVID) INPUTAUDIO/VIDEOOUTPUTCOMPONENT(CVID) INPUTCOMPOSITE(VID) INPUTAUDIO/VIDEOOUTPUTANTENNA/CABLEINPUTDIGITAL/ANALOGCOMPOSITE INPUT Connect devices that have Audio/Video (composite) outputs such asVCRs, DVD players, satellite receivers, cable boxes, camcorders and video game consoles. Useaudio cables to connect the left and right audio jacks for sound.• VIDEO Provides composite video connection. The video connector is usually yellow.• AUDIO-L Provides left audio connection. The left audio connector is usually white.• AUDIO-R Provides right audio connection. The right audio connector is usually red.To access the device when using these jacks, use the INPUT button on your remote until VIDappears.- OR -COMPONENT INPUT Connect devices that have component (Y Pb Pr) outputs such asVCRs, DVD players, DVD-PVRs, DVD recorders, satellite receivers and cable boxes. Thisconnection provides optimum picture quality because the video is separated into three signals.The AUDIO L and R jacks are shared with the COMPOSITE INPUT connection for sound.To access the device when using these jacks, press the INPUT button on your remote untilCVID appears.Refer to page 7 for a detailed explanation of how to connect Y Pb Pr cables to your TV.• AUDIO-L Provides left audio connection. The left audio connector is usually white.• AUDIO-R Provides right audio connection. The right audio connector is usually red.Remember: You can use the Component connection or the Composite connection butnot both at the same time. They share the same AUDIO R/L input jacks.AUDIO/VIDEO OUTPUT (Models 24F524T, 27F524T, 27F534T, 32V434T and 32V524Tonly) Connect your TV to external devices with inputs, such as VCRs, digital recorders orsecondary monitors. Audio/video cables are used for this connection.Chapter 1 1Connections & Setup