Choose Your ConnectionThere are several ways to connect your TV, depending on the devices you want to connectand the quality of the signal you want to achieve. Connections will vary according to thetypes of output jacks the devices you want to connect can accommodate.Back of TVgo to page 5 forinstructions ongetting a signal.COMPONENT VIDEOY Pb PrVIDEOINPUT L RAUDIOVIDEOOUTPUTS-VIDEOOUTS-VIDEOINL RAUDIOL RAUDIOCOMPONENT(CVID) INPUTCOMPOSITE(VID) INPUTAUDIO/VIDEOOUTPUTCOMPONENT(CVID) INPUTANTENNA/CABLEINPUTDIGITAL/ANALOGDVD player23Y Pb Pr (Component Video) ConnectionIMPORTANT - If you aren’t receiving a picture with this connection, the problem mightbe with your DVD player. If the DVD player is “progressive scan” DVD player, you needto change the setting from progressive to interlace. The procedure for changing this on aDVD player varies. Look for a button on the front of the DVD player (it might be calledresolution or display), or see if there is a switch on the back (it might be labeled “int/prog”or something similar), or the item might be in the menu system of the DVD player. Consultyour DVD player owner’s manual for instructions.Continues on next page...Chapter 1 Connections & Setup