II ÷ IIUsing the Remote Control÷DVD Turns on a compatible RCA,GE,or ProseanDVD player and sets the remote to control the DVDplayer. Also used with the ON.OFF button to turn on other compatible DVDplayers.GUIDE If you're operating another component that has an electronic program guide, this buttonaccessesthe on-screen Guide. Also operates the disc menu For some compatible RCA,GE,and ProscanDVD players.OPEN.CLOSE In DVD mode, opens or closesthe DVDdisc tray for some compatible RCA,GE,andProsean DVDplayers.REVERSE,PLAY,FORWARD,RECORD,STOP,PAUSE If programmed, provides transport control forsome compatible remote-controllable VCRsor DVD players.SEARCH In VCR mode, accesses Index Search feature for some compatible RCA, GE, and Proscan VCRs.SPEED In VCR mode, selects a recording speed for some compatible RCA, GE, and Proscan VCRs.VCR Turns on a compatible RCA, GE, or Proscan VCR and sets the remote to control the VCR. Also usedwith the ON.OFF button to turn on other compatible VCRs.ZOOM In DVD mode, zooms in on the picture for some compatible RCA, GE, and Proscan DVD players.Using the INPUT ButtonUse the INPUT button to scroll through the available Video Input Channels so you can view contentcoming from components you have connected to the TV.I. Make sure the component you want to view is turned ON.2. Press INPUT to tune to an available video input source and view the component.3. To return to the previous channel, continue pressing INPUT.DVDON,OFFProgramming the Remote to Operate OtherComponentsThe universal remote can be programmed to operate somebrands of remote controllable VCRs and DVD players. Theremote is already programmed to operate most RCA, GE, andProsean VCRs and DVD players.Note:TheTVbuttoncan'tbeprogrommedon tflisremote.Find Out If You Need to Program the RemoteTo determine whether the universal remote needsto beprogrammed for your VCRor DVDplayer, turn on thecomponent. For example, to program the remote for a VCR,turn on the VCR. Point the remote at the VCR,and presstheVCRbutton. ThenpressON.OFF or CH + (channel up) or CH -(channel down) to see if the VCRresponds to the remotecommands. If the component does not respond, the remoteneedsto be programmed.Programming the RemoteThere are two ways to program the remote control:• automatic code search• direct entry÷lOI I 24F530T.O2-RemoteChapter 2,o ÷ o,o,o a ,,o II