II ÷ IIConnections and getupExplanation of Jacks and CablesThissection describesthe jacks you can use to make connections. Thereare several ways to connectcomponents to your TV.÷ANTENNA_IN iANTENNAIN jack and coaxial cable.LI.°.01 0S-VIOEO I 2e.-VIDEO-.zVIDEO 1 and VIDEO2 jacks, audio/videocables, and S-Video cable.ANTENNA IN Lets you connect a coaxial cable to receivethe signal from the antenna, cable, cable box, or if using theexample on page 4, a VCR.VIDEO 1 and VIDEO 2VIDEO, AUDIO R and UMONO Lets you connect acomponent such as a VCR, DVD player, or laserdisc player.• R (RIGHT) AUDIO Provides right audio connection. Theright audio connector is usually red.• UMONO AUDIO Providesleft audio connection. Theleft audio connector is usually white.VIDEO Provides composite video connection. The videoconnector is usually yellow.S-VIDEO Provides better picture quality than the videojacks because the color part of the signal is separatedfrom the black and white part of the picture. When usingS-VIDEO IN, make sure to connect left and right audiocables to the LIMONO and R AUDIO Input jacks.÷4) d;--[4).0#4)..ON0,4) pr R SUB4) 4) 4) 4) 4)w0oFE.1 2J- _ll][O-JY, Pb, Pr jacks, audio, subwoofer andcomponent video cables.Component Video (Y, Pb, Pr), Audio Out, andSubwoofer (model 24F530T only)Y, Pb, Pr (Component Video) Provides optimum picturequality because the video is separated into three signals. Usethree video-grade cables for the connection. These cables areoften color-coded (red, blue and green). When using Y, Pb,Pr, make sure you connect left and right audio cables to theR and LAUDIO input jacks.Note: TheYcompr_nentvider_jock is also the composite VIDEO2videojock end is colored yellow.Keepthis in mind when connectingto the component videojacks.Audio Output (L and R} Connect an amplifier or audioreceiver for improved sound quality.SUB WOOFER Allows you to connect an external subwoofcrfor improved bass effects.Chapter 1