12 Chapter 1 Connections and Setup1Connecting a Device with Composite Video (Good)This connection allows you to connect a device that has a Video Out jack, for example, aDVD player.Using the example of a DVD player:1. If necessary, connect your cable and/or off-air antenna as described on page 10.2. Connect your yellow video cable. Connect a video cable to the (VID) VIDEO jack on theback of the TV and to the VIDEO OUTPUT jack on the DVD player.3. Connect your red and white AUDIO cables. Connect the AUDIO (red and white) cables tothe (VID) right and left AUDIO jacks on the back of the TV and to the AUDIO OUTPUTjacks on the DVD player.Composite Video ConnectionThis is an example of a connection using the composite video jack.Connecting a Device with Component Video (Better)This connection allows you to connect a device that has Y Pb Pr jacks, for example, a DVD player.Using the example of a DVD player:1. If necessary, connect your cable and/or off-air antenna as described on page 10.2. Connect your Y Pb Pr component VIDEO cables. Connect three VIDEO cables or specialY Pb Pr cables to the COMPONENT INPUT (CMPT) Y Pb Pr jacks on the back of the TVand to the Y Pb Pr outputs on the DVD player.3. Connect your red and white AUDIO cables. Connect the AUDIO (red and white) cables tothe Component Input (CMPT) right and left AUDIO jacks on the back of the TV and to theAUDIO OUTPUT jacks on the DVD player.Don’t forget:If necessary, connectantenna or cable to geta picture. Go to page10 for instructions.COMPOSITE VIDEO CABLES ARE COLORCODED-YELLOW=VIDEORED=RIGHT AUDIO; WHITE=LEFT AUDIORedYellowWhite