RCA Alert Guard 24F671T User Manual

Also see for Alert Guard 27F671T: Brochure & specs

Contents

RCA Alert Guard 24F671T User Manual Manual pdf 27 page image

Chapter 3 23Graphics contained within this publication are for representation only.Using the TV’s FeaturesWhy You Should Use the Auto Tuning FeatureThe auto tuning feature automatically tunes the TV to the correct channel for differentcomponents you have connected to your TV (like a VCR, DVD Player, etc.) When you set upauto tuning in the menu system, you don’t have to remember to change your TV tochannel 3; for example, when you want to watch the tape in your VCR.How to Set Up the Auto Tuning FeatureThe way you set up the auto tuning feature in the TV’s menu corresponds to thecomponent buttons on the remote and the way you have each component connected toyour TV. When you set up auto tuning, you’re telling the TV what channel to tune to whenyou press the VCR1, VCR2, DVD, or SAT•CABLE button on the remote control.1. Press MENU (the MAIN MENU appears).2. Highlight Setup and press OK on your remote control.3. Highlight Auto Tuning and press OK.4. Choose which channel you would like to set:Set VCR1 The channel the TV tunes to when you press the VCR1 button.Set VCR2 The channel the TV tunes to when you press the VCR2 button.Set SAT/CABLE The channel the TV tunes to when you press the SAT•CABLE button.Set DVD The channel the TV tunes to when you press the DVD button.5. Press the right arrow button to select the choice that matches the way you have thecomponent connected to this TV, and press OK.The choices and a brief explanation follow:N/A Choose this if you don’t have this particularcomponent connected to the TV, or if you don’t want the TVto automatically tune to the correct channel when you’reusing this component.CH02 (SAT/CABLE only) Component is connected to the TVANT jack on the back of the TV, and you want the TV to tuneto channel 2 when you press the SAT•CABLE button on theremote. Reminder: make sure the component’s Channel 2/3/4switch is set to channel 2. Usually this switch is on the backof the component.CH03 or 04 Component is connected to the TV ANT jack onthe back of the TV, and you want the TV to tune to channel 3or 4 when you press the corresponding button on theremote. Reminder: make sure the component’s Channel 3/4switch is set to the appropriate channel.VID1 Component is connected to the VIDEO 1 VIDEO orS-VIDEO jack on the back of the TV and you want the TV totune to a video input channel when you press thecorresponding button.VID2 Component is connected to the VIDEO 2 VIDEO or Y,Pb, Pr jacks on the back of the TV and you want the TV totune to a video or component video input channel when youpress the corresponding button.Go BackSet VCR1Set VCR2Set SAT/CABLESet DVDAUTO TUNINGVID1 . . .VID2 . . .CH02 . . .CH03 . . .