RCA BRC3087 User Manual

Also see for BRC3087: Owner's manual Manuel d'utilisation

Contents

7EN2. Using a HDMI cableFor TVs that support it, HDMI can provide the bestquality audio and video output (depending on mediasource), and so is the preferred connection type. TheHDMI cable incorporates both audio and video signals,so you will have just one cable running from the unitto your TV. Using a HDMI cable (not included), connectthe HDMI OUT jack on your unit to the HDMI IN jackon your TV or HDMI-compatible display.ConnectionsA. Connecting to a TV1. Using an AV cableIf your TV has Audio/Video inputs, you can connect theplayer to your TV using an AV cable (not included).B. Connecting an Audio ReceiverThis player will down-mix Dolby Digital or DTSmulti-channel audio to stereo audio for playbackon the player's internal speakers or for output to aconnected amplifier.Listening on External Audio Equipment1. Connect the player to the left/right Audio In jackson the other equipment using the included AVcable.2. Turn on your audio equipment and follow the instructions provided with it to select the AUDIO INfunction.Note:• Make sure to use the correct cable. Connecting the plugs incorrectly may cause lack of signal, or weaksignal.TVBlackAV Cable(not included)TVHDMI Cable(not included)• When a HDMI cable is connected, the unit's speakerwill be muted and the audio will instead output to theconnected device.• Configure the Video Setup options (found in theSETUP menu) to best match the capabilities of yourTV.• Set the HDMI resolution to match the capabilities of your TV. This setting is also in the Video Setup sectionof the SETUP menu. Note: this setting can be selected only when the HDMI cable is connected to a TV.Note:• Refer to your TV owner’s manual as well.• When you connect the player to your TV, be sure to turn off the power and unplug both units from thewall outlet before making any connections.HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks ofHDMI licensing LLC.Stereo Receiver/AmplifierBlackAV Cable(not included)C. Using Headphones/EarphonesTurn down the volume before connecting theheadphones/earphones. Slowly raise the volumewith the headphones on until you reach your desiredvolume. When headphone is connected, the speaker isautomatically disabled.Warning:Excessive sound pressure from earphones and headphones can cause hearing loss. Avoid listeningto sound at excessive levels which could be harmful to your ears.Headphones/Earphones[1/8” (3.5mm) diameter plug]BRC3087 ENG IB.indd 7 4/6/2011 17:14:01