8ENDTS2.0+Digital OutTMDTS2.0+Digital Out denotes the dual ability to pass the DTS encoded digital bitstream to an external DTSdecoder for playback as well as down-mix the digital surround soundtrack for playback in a 2-channelenvironment through analog outputs.Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 &other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and theSymbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of DTS,Inc. © DTS, Inc. All Rights Reserved.Dolby TrueHDDolby TrueHD is a very high quality audio format that reproduces the studio master audio.This unit allow audio to be decoded to a maximum of 5.1 ch of PCM audio and output from the HDMIterminal. Also, audio can be output with "Bitstream" to an AV amplifier that supports it.Manufactured under license from Dolby Laboratories.Dolby and the double-D symbol are trademarks of Dolby Laboratories.Sound SystemUnit OperationTurning on the Unit1. Slide the CHARGE / OFF / ON switch on the player to the ON position.2. The start-up picture will appear on the screen.3. After use, slide the CHARGE / OFF / ON switch on the player to OFF.Note:• If the CHARGE / OFF / ON switch is in ON position, but the product does not appear to be on,it's actually in STANDBY mode - you can turn it on by moving the switch to the OFF (middle)position, then back to ON position. You can also turn the product from STANDBY to ONusing the remote control's STANDBY/ON button.• When the CHARGE / OFF / ON switch is in ON position you can use the remote control to putthe product in STANDBY mode. The red light on the front of the product will illuminatewhen the product is in STANDBY mode.• Please ensure the player is powered by the AC power adapter if you intend to use STANDBYmode.TMBRC3087 ENG IB.indd 8 4/6/2011 17:14:02