RCA D61120 User Manual

Also see for D61120: Brochure & specs

Contents

Chapter 2 27Using the Remote ControlMUTE Reduces the TV’s volume to its minimum level. Press again torestore the volume.OK When in the menu system, selects highlighted items.ON•OFF When in TV mode, turns the TV on and off. If in anotherdevice mode (VCR, DVD, SAT•CABLE, etc.) and programmed, will turnthe device on and off.PIP Brings up the small picture-in-picture window. Press again toremove the PIP window. (See Chapter 3 for more information aboutusing PIP.)REVERSE, PLAY, FORWARD, REC•VCR+, STOP, PAUSE Ifprogrammed, provides transport control for some remote-controllableVCRs, DVD players, laserdisc players, tape decks, and CD players.Pressing REC•VCR+ when using the GUIDE Plus+ System sets the VCRto record a program.SAT•CABLE Puts the remote in SAT•CABLE mode and, if Autotuning isenabled, will turn on the TV and tune to the correct input channel.SKIP Press once before changing channels and the TV will wait 30seconds before returning you to the original channel. Press repeatedly toadd more time. Also, activates Search function for some GE, RCA, orPROSCAN VCRs.SWAP When using PIP, swaps the main picture with the PIP window.TV Turns on the TV and puts the remote in TV mode. Also displayschannel information.VCR1 Puts the remote in VCR1 mode and, if Autotuning is enabled,will turn on the TV and tune to the correct input channel.VCR2 Puts the remote in VCR2 mode and, if Autotuning is enabled,will turn on the TV and tune to the correct input channel.VOL – or VOL + Decreases or increases the TV’s volume.WHO In SAT mode, press to select available channel lists “profiles”(RCA, GE, and PROSCAN satellite or HD receivers only). This buttondoes not operate in the TV mode.Using the INPUT ButtonUse the INPUT button to scroll through the available input channels andview components you have connected to the TV.1. Press TV to place the remote in TV mode. Make sure thecomponent you want to view is turned ON.2. Press INPUT to tune to an available input channel.3. To return to the channel you were previously watching, pressthe INPUT button until you see the channel in the upper rightcorner.TipTo turn off all the RCA, GE, and PROSCAN componentsthat are connected to the TV, press ON•OFF twicewithin two seconds.This feature only works with most RCA, GE, andPROSCAN products.