RCA DRC220N User Manual

15Chapter 3: Playing Discs (DVDs)To Load and Play a DVD DiscTurn on the TV and your DVD Player (press ON•OFF on the remote or press the STANDBY/ON buttonon the DVD Player).1. If necessary, tune the TV to its Video Input channel (if you need more information, go to page 61).2. Press the OPEN/CLOSE button (the disc tray opens).3. Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content onboth sides, so you can place either side up).4. Press the OPEN/CLOSE or PLAY button. The disc tray closes. The DVD Player reads the disc’s tableof contents, and then one of three things happens depending on how the disc was programmed:• The disc starts playing.• The disc menu appears on the screen. One of the options will start disc play. Highlight that optionand press OK.• The DVD Player’s main menu appears on the screen. Highlight the Play option and press OK.When you stop playing a disc, the player remembers where you stopped. When you start playing thedisc again, the DVD Player picks up where you left off unless the disc is removed or the player isunplugged, or if you press the STOP button twice.Can'tCatchUpCan'tCatchUpCan'tCatchUp(WidescreenVersion)This is an example of atwo-sided disc — the titleis usually in the centerof the disc.This is an example of aone-sided disc.1590940A 3/7/02 9:22 AM Page 15