RCA DRC220N User Manual
                                                                    | |
Contents
|
5Chapter 1: Setup and ConnectionsConnection: DVD + TV1. Connect the audio cables to the AUDIO OUT L (left –white) and R (right – red) jacks on the back of yourDVD Player, and to the corresponding Audio Inputjacks on your TV (sometimes labeled AUDIO INL and R).2. Connect the video cable.A. Basic video connection – Connect the video cable (yellow)to the VIDEO OUT jack on the back of your DVD Player, and tothe Video Input jack on your TV (sometimes labeled VIDEO IN).– OR –B. S-Video (optional) – If your TV has an S-Video jack,connect an S-Video cable (not provided) to the S-VIDEO OUTjack on the back of your DVD Player and to the S-VIDEO jackon your TV.Note: If your TV has component video (Y, Pb, Pr) jacks, use video-grade cables (not provided) to connect the TV to the DVD player (Yto Y, Pb to Pb, etc.). It is essential to match the color codedconnectors with a compatible TV.3. Connect the AC power cord into an AC outlet.4. Connect your cable or off-air antenna to yourtelevision as you normally would. You may need toconsult your television manual for details.Go to page 8VIDEO OUTOPTICAL COAXIALRYPbPrLAUDIOOUTVIDEOAUDIOL RS-VIDEO CABLE/ANTENNABack of TV (example)Back of DVD PlayerCABLEOROFF-AIR SIGNALVIDEOOUT S-VIDEODIGITAL AUDIO OUTThe back of your TV and VCR might look different thanthe ones pictured here.Details about the different kinds of cables used to connectyour DVD player are on page 56.- OR -1590940A 3/7/02 9:21 AM Page 5 |
Related manuals for RCA DRC220N
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine