RCA DRC500L User Manual

17Chapter 3: Playing Discs (DVDs)Loading and Playing DiscsTurn on the TV and your DVD Player (press STANDBY/ON on the player or press the DVD button onthe remote control).1. Press the OPEN•CLOSE button (the disc tray opens).2. Place a disc gently into the first slot in the tray with the disc’s label facing up (double-sideddiscs have content on both sides, so you can place either side up).3. Press the SKIP button to rotate the disc tray. Continue placing discs into the tray as describedabove. There are 5 discs in the disc tray.4. Press the OPEN•CLOSE or PLAY button. The disc tray closes.The DVD Player reads the disc’s table of contents, and then one of two things happens dependingon how the disc was programmed:• The disc starts playing.• The disc menu appears on screen. One of the options will start disc play. Highlight that optionand press OK.When you stop playing a disc, the player remembers where you stopped. When you start playingthe disc again, the DVD Player picks up where you left off unless the disc is removed, the playeris unplugged, or if you pressed the STOP button twice.Disc ExchangeThe Exchange button on the front panel allows you to change up to 4 discs while the fifth disc plays.1. With a disc playing, press EXCHANGE on the front of the player. The disc drawer opens withfour slots available.2. Use the SKIP button to turn the platter to the other slots.3. After you’ve loaded or changed discs, press EXCHANGE again to close the disc drawer.Can'tCatchUpCan'tCatchUpCan'tCatchUp(WidescreenVersion)This is an example of atwo-sided disc — the titleis usually in the centerof the disc.This is an example of aone-sided disc.Note: Before you beginplaying discs, theEXCHANGE button canbe used to open the discdrawer to load discs.IB/500L Body 6/7/02 11:12 AM Page 17