RCA DRC6100N User Manual

Contents

32 Chapter 4VCR FeaturesReviewing and Clearing ProgramsTo review programs that you have already set up:1. Press the MENU button to display the VCR Main Menu.2. Press the down arrow button until PROGRAM ishighlighted, and press OK (the Program menu appears).3. Use the left and right arrow buttons to choose theprogram number you want to check or clear (1-8).• To erase a program, press CLEAR.CLOCKPROGRAMTUNINGSETUPSELECTTO EXIT PRESS ENTERPROGRAM 1MONTH : JULYDAY : 6 FRISTART : 6:00 PMSTOP : 7:30 PMCHANNEL : 4 TVSPEED : SPREPEAT : ONCETO EXIT PRESSTO ERASE PRESSTime CounterThe time counter shows the actual time used when recording or playing a tape. The time counter helpslocate the beginning or end of recorded events. It resets to 0:00:00 whenever a tape is ejected fromthe DVD/VCR.For example, if you record a 30–minute program at the beginning of a tape, rewind it, and then wantto go to the end of the first program to start another recording:1. Press the INFO button twice to display only the timecounter.2. Press the CLEAR button to reset the time counter to0:00:00.3. Press the remote control’s FORWARD button to advancea tape until the time counter reads 0:30:00.4. Press the STOP button. This is the approximate end of a30-minute program (you may want to press the PLAYbutton to verify). When the tape is cued correctly, youcan begin recording.5. Press the INFO button to remove the time counter fromthe screen and return to the normal display mode.0:30:00Hours MinutesSeconds