62 Chapter 6Additional InformationHow to find your TV’s Video Input ChannelIn order to see what’s playing on your DVD/VCR, you need to tune the TV to the Video InputChannel that corresponds to the jacks you used to hook up the unit to the TV. The Video InputChannel(s) varies for different brands and different models of TVs. Below are some things to try.• Consult the Owner’s Manual that came with your TV.• If you can’t find the information in the manual, or can’t find the manual, review the following listof ways to access Video Input Channels on TVs.• There might be a button on the TV’s remote control that accesses the Video Input Channel (seetable below for examples).• You might select the Video Input Channel from the TV’s menu system.• You might tune to it by pressing a specific channel number (see table below)• Press the Channel up and/or down buttons on the TV’s remote control (sometimes the Video InputChannel is stored in the channel list).Video Input Channel VariationsButton/Switch Button on the Channelon the TV TV remote NumberVIDEO VID1 S-VID 00 93SIGNAL LINE INPUT 90 VID 1VID 1 VID SOURCE 91 VID 2VID 2 VIDEO AUX 92 INPUT
