RCA DRC99370U User Manual

Also see for DRC99370U: User manual User manual

Contents

important safety instructions

RCA DRC99370U User Manual Manual pdf 1 page image

DRC99370Uuser manualRead these instructions before using your new product for the first time.AVC Multimedia,Markham, Ontario L3R 1E3http: //www.RCAav.comparticularly at plugs, convenience receptacles, and the pointwhere they exit from the apparatus.11. Only use attachments/accessories specified by themanufacturer.12. Use only with a cart, stand, tripod, bracket,or table specified by the manufacturer, orsold with the apparatus. When a cart isused, use caution when moving the cart/apparatus combination to avoid injuryfrom tip-over.13. Unplug this apparatus during lightningstorms or when unused for long periodsof time.14. Refer all servicing to qualified service personnel. Servicingis required when the apparatus has been damaged in anyway, such as the AC power cord or plug is damaged, liquidhas spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does notoperate normally, or has been dropped.1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block the ventilation openings. Install in accordancewith the manufacturer's instructions.8. Do not install near any heat sources such as radiators, heatregisters, stoves, or other apparatus (including amplifiers) thatproduce heat.9. Do not defeat the safety purpose of a polarized or grounding- type plug. A polarized plug has two blades with one widerthan the other. A grounding type plug has two blades anda third grounding prong. The wide blade or the third prongare provided for your safety. If the provided plug does not fitinto your outlet, consult an electrician for replacement of theobsolete outlet.10. Protect the power cord from being walked on or pinchedImportant Safety InstructionsSafety Precautions* SEE BOTTOM OF UNIT FOR GRAPHIC SYMBOLS *WARNING: Should any trouble occur, disconnect the AC power adapter and refer servicing to a qualified technician.WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT PLACEOBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED MAy RESULT INHAZARDOUS RADIATION EXPOSURE.CAUTION: DANGER OF EXPLOSION IF BATTERy IS INCORRECTLy REPLACED. REPLACE ONLy WITH THE SAME OR EQUIVALENT TyPE.The lightning flash with an arrowheadsymbol, within the equilateral triangle,is intended to aler t the user to thepresence of uninsulated "dangerousvoltage" within the product's enclosure that may beof sufficient magnitude to cause an electric shock.T h e e xc l a m a t i o n p o i n t w i t h i n t h eequilateral triangle is intended to alertthe user to the presence of importantoperating and maintenance (servicing)instructions in this owner’s manual.E - 1This product contains alow power laser device.THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.On Placement• Do not use the unit in places that are extremely hot, cold, dusty, or humid.• Place the unit on a flat and even surface.• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing it oncarpeting.• To avoid magnetizing, do not place the unit near speakers or magnets.• Do not use this unit in direct sunlight or leave the unit in a closed automobile (or similar environments) where it would beexposed to high temperatures above 104°F (40°C).• No naked flame sources such as lighted candles should be placed on the AC power adapter or the main unit.• The AC/DC adaptor and apparatus should not be exposed to splashing or dripping liquids, and no objects filled with liquids,such as vases, should be placed on the AC/DC adaptor and apparatus.• The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, should beplaced on apparatus.On Safety• When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself. Pulling the cord may damage itand create a hazard.• When you are not going to use the unit for a long period of time, disconnect the AC power adapter.On Condensation• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit. When thereis condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to 2 hours before turning the poweron, or gradually heat the room and allow the unit to dry before use.Ventilation Warning• Do not block the ventilation openings or holes. If the ventilation openings or holes are blocked by a newspaper or cloth, etc.,the heat may not be able to get out.• Do not operate the unit in a confined space, such as a bookcase or built-in cabinet. Allow about 4 inches (10cm) of free space allaround the unit for adequate ventilation.Rating Plate Location• The rating plate is located on the bottom of unit.FCC StatementsNOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of theFCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.– Consult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment.Notes on CopyrightIt is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material without permission.Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936 licensed for limited viewing uses only.This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Useof this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing usesonly unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.Please check and identify the supplied accessories.Remote Control (with battery) ..................................................................................................................................................................x 1AC Power Adapter ..........................................................................................................................................................................................x 1Car Power Adapter .........................................................................................................................................................................................x 1AccessoriesControl Reference Guide1. LCD screen2. HDMI jack3. DC IN 9V - 12V jack4. AUDIO / VIDEO OUT jack5. CHARGE / STANDBY / ON switch6. VOLUME controlAdjusts the volume.7. Headphone jack8. STOP buttonPress to stop playing a disc.MENU buttonAccesses DVD Disc Menu if DVD disc is currentlyplaying.Accesses Setup menu if disc is not playing.buttonPress to start or resume playback of a disc.Unit Pressing during playback of a disc will causeplayback to be paused.PREV buttonPress to go back to the previous title / chapter / track.In DVD Menu or Setup Menu, press to scroll left.SEARCH buttonPress to scroll up, press to perform fast forwardplayback during CD playback.In DVD Menu, Setup Menu or JPG Menu, press toscroll up.NEXT buttonPress to advance titles / chapters / tracks.In DVD Menu or Setup Menu, press to scroll right.SEARCH buttonPress to scroll down, press to perform fast reverseplayback during CD playback.In DVD Menu, Setup Menu or JPG Menu, press toscroll down.9. SD Card SlotUSB Connector port10. Disc DoorPush to close the disc door.11. OPEN knobPress the open knob to open the disc door.12. Remote sensorSenses the remote control's signals.13. ON indicator14. CHARGING indicatorCharge the rechargeable battery before using it forthe first time. Complete charging typically takesapproximately 4-5 hours. The charging light will goout when the battery becomes fully charged.Battery ReplacementWhen the battery becomes weak,the operating distance of the remotecontrol will be greatly reduced andyou will need to replace the battery.2. Insert one CR2025 (3V) sizebattery.To Change Remote Battery1. Open the battery door.Remove thePLASTIC sheetbefore USING theRemote Control.Note: If the remote control is not going to be used for a long time, remove the battery.WARNING: Do not dispose of the battery in a fire or it may leak and/or explode.WARNING: Batteries should not be exposed to excessive heat such as sunshine, fire or the like.CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.Using the Remote Control• Point the remote control at the REMOTE SENSOR located on the unit.• When using this unit in very bright light, the infrared REMOTESENSOR may not work properly.Remote ControlRemote Control1. VIDEO MODE buttonAdjust Brightness, Ratio and Contrast of the LCD screen.2. PREV buttonMove back through titles,chapters or tracks on a disc.3. / SEARCH buttonsSEARCH:Fast reverse playback.SEARCH:Fast forward playback.4. GOTO buttonSkip directly to a location ona CD/DVD.5. Cursor ( , , , ) buttonsMove between selections ona menu screen and adjustcertain settings.ENTER buttonConfirm selections on a menuscreen.6. MEMORY buttonSet titles/chapters/tracks in a favorite order.7. Number (0 - 9) buttonsUse when creating programs or locating a title/chapter/track orspecific time.8. REPEAT A-B buttonPerform point-to-point repeat playback on a DVD or CD.REPEAT DISC buttonRepeat a DVD chapter or title.Repeat a CD track or the whole disc.SETUP buttonIn Stop Mode, press to display theunit’s SETUP menu.9. MENU buttonEnter and exit the main DVD Menu.10. NEXT buttonSkip to next title, chapter or track ona disc.11. STOP buttonStop playing a disc.PLAY buttonStart or resume playback of a disc.PAUSE buttonPress once to pause playback. Presssubsequently to advance frame byframe on a DVD.12. DISPLAY buttonS h ow s t at u s i n fo r m at i o n o n t h escreen.13. ANGLE buttonSwitch between multiple cameraangles if applicable to the DVD.14. AUDIO buttonS e l e c t o n e o f t h e a u d i o s o u n dtracks on a DVD (if more than one isavailable) or select the audio outputmode on a CD.15. SUBTITLE buttonSelect one of the subtitle languagesprogrammed on a DVD (if available).RETURN buttonReturn to normal operation afterusing the SETUP menu of a DVD.SUBTITLE/RETURNM65498 0732ENTERMEMORY DISPLAYAUDIOMENUPREV SEARCHGOTOVIDEOMODENEXTSTOP PAUSEPLAYANGLESETUPA-B DISCREPEAT123456789101112131415The unit can play backRegion Management InformationRegion Management Information: This unit is designed and manufactured to respond to the Region ManagementInformation that is encoded on DVDs. If the region number printed on the DVD does not correspond to the region numberof this unit, it cannot play that disc.The region number of this unit is 1.Note on Unauthorized Discsyou may not be able to play some DVDs on this unit, particularly if they were purchased from outside your geographic areaor made for business purposes.DVDs[8cm/12cm disc] CompatibleAudio CDs[8cm/12cm disc]Disc Function or Operation That is Not AvailableWhen the symbol appears on the screen, it indicates the function or operation attempted is not available at that time. Thisoccurs because the DVD manufacturer determines the specific functions of DVDs. Certain functions may not be available onsome DVDs. Be sure to read the documentation provided with the DVD.Icons Used on DVDsSample lconsNote:When playing back a CD-G (Graphics) or CDEXTRA disc, the audio portion will be played, butthe graphic images will not be shown.Language selections for audioLanguage selections for subtitlesScreen aspect ratioMultiple camera anglesRegion code indicator1Titles, Chapters and Tracks• DVDs are divided into “titles” and “chapters”. If the disc has morethan one movie on it, each movie would be a separate “title”.“Chapters” are sections of titles.• Audio CDs are divided into “tracks”. A “track” is usually one songon an Audio CD.Note: Numbers identify each title, chapter, and track on a disc. Most discshave these numbers recorded on them, but some do not.Disc FormatsChapter1Title1 Title2Chapter2 Chapter3 Chapter1 Chapter2Track1 Track2 Track3 Track4 Track5MaintenanceCleaning the DiscA defective or soiled disc inserted into the unit can cause sound to drop out during playback.Handle the disc by holding its inner and outer edges.• Do NOT touch the surface of the unlabeled side of the disc.• Do NOT stick paper or tape on the surface.• Do NOT expose the disc to direct sunlight or excessive heat.• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.• NEVER use solvents such as benzine or alcohol to clean the disc.• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause malfunctions.Cleaning the Unit• Be sure to turn the unit off and disconnect the AC power adapter before cleaning the unit.• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in a weaksoap-and-water solution and wrung out thoroughly, then wipe with a dry cloth.• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to remove dust.Important Note• Before transporting the unit, remove the disc from the disc compartment.E - 2To DC IN 9V - 12V Jack2Car power adapterTo cigarettelighter socket1AC power adapter 21To DC IN 9V - 12V JackTo wall outletB. Using the Car Power AdapterThe 12V car power adapter allows theunit to be used with vehicles that have a12V, negative ground electrical system.Warning:Disconnect the car power adapter whennot in use. Not for use in 24V vehicles.A. Using the AC Power AdapterCaution:• The AC power adapter included with this unit is for its use only. Do not use it with other equipment.• When the unit is not going to be used for long time, disconnect the AC power adapter from the wall outlet.• When the AC power adapter is plugged in, the apparatus is not completely disconnected from the mainpower supply, even when the power is turned off.Warning:The AC/DC adaptor is used as disconnect device. The AC/DC adaptor of apparatus should not be obstructedOR should be easily accessed during intended used. To be completely disconnect the power input, the AC/DCadaptor of apparatus shall be disconnected from the mains.Power SupplyThe supplied AC power adapteroperates on AC 100-120V.Caution:• Use the provided 12V car poweradapter only. Use with other carpower adapters could damagethe unit.• T h e 1 2 V c a r p o we r a d a p t e rincluded with this unit is forits use only. Do not use it withother equipment.• In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.• Make sure the unit is securely fastened to prevent it from falling or flying through the air in the event of anaccident.• When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may becomehot due to poor contact. Be sure to clean the cigarette lighter socket before use.• After use, disconnect the 12V car power adapter from both the unit and cigarette lighter socket.C. Using the Built-in BatteryThe unit has a built-in, non-r e p l a c e a b l e , r e c h a r g e a b l ebatter y. Charge the built-inbattery before using it for thefirst time. Complete chargingtypically takes approximately4-5 hours. The charging light willgo out when the built-in batterybecomes fully charged.Warning:• The built-in battery can only be recharged when the unit is in CHARGE mode while using the AC poweradapter.• The built-in battery cannot be recharged when the unit is in ON mode.• Do NOT recharge the built-in battery in a vehicle using the car power adapter.• Batteries should not be exposed to excessive heat such as sunshine, fire or the like.Note:• When the built-in battery power is low, "Battery Low" will display on the screen and the unit will stopplaying.• Recharge the built-in battery when you are ready to use it again.• While using the built-in battery, the environmental temperature should be 41°F (5°C) to 95°F (35°C).• To get the longest service life of the built-in battery, charge at indoor-temperature.• The built-in battery in this device may present a risk of fire or chemical burn if mistreated. Do notdisassemble, heat above 212oF (100oC), or incinerate.• The unit should not be exposed to excessive heat such as sunshine, fire or the like.• When discarding the unit, environmental problems must be considered and local rules or laws governingthe disposal of such products must be strictly followed.Turning on the Unit1. Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ONposition.2. The start-up picture will appear on the screen.3. After use, slide the CHARGE / STANDBY / ON switch to the STANDBy (power off )position.To recharge the built-in battery1 To AC poweroutlet2 To DC IN 9V- 12V Jack3 Slide the switchto CHARGE 4 Charginglight ON5Rechargingis completedwhen charginglight goes outAC poweradapterE - 3B. Using Headphones/Earphones• Turn down the volume before connecting, and then adjust thelevel.• When headphones/earphones are connected, no sound will beemitted from the unit's speaker.Caution:Avoid listening to sound at levels which may be harmful to your ears.Headphones/Earphones(3.5mm diameter plug)(not included)C. Connecting a USB connector portYou can connect a USB flash drive (not included) to the USB port on the unit to play DivX® movies as well aspicture files.• Plug the USB flash drive to the USB port on the unit.• In DVD mode, press STOP button once to stop DVD playing, press STOP button three times to changeto USB mode.For operation of file playback on the USB flash drive, please refer to the section “PLAYING DivX® VIDEO ORPICTURE FILES”.Note:• It is recommended USB flash drive is plugged when the unit is in STANDBY mode.• It does not support USB harddisk mass storage device, multi-card reader and other USB computerperipheral.• It only supports USB flash drive (FAT32/16 max. capacity 32G bytes max, video bitrate is 7Mbps).• Make sure your USB flash drive or SD card is FAT16/FAT32 file system. All other file system will not besupported.D. Using a SD Card Slotyou can connect a Secure Digital (SD) card (not included) to the memory expansion card slot on the unit toplay sound & picture files.• Plug the SD card fully into the memory expansion card slot on the unit until it clicks.• In DVD mode, press STOP button once to stop DVD playing, press STOP button three times to changeto mode (DVD/USB/SD). In memory expansion card mode, it reads the information of the SD card andplaying the picture and/or sound file(s).Warning:• It is recommended the SD card is plugged when the unit is in STANDBY mode.• If the SD card is oriented incorrectly, it will not go fully into the slot. Do not apply force when inserting theSD card.• To remove the SD card, push the SD card into the slot and then slowly remove your finger, the lock isreleased and the SD card is pushed out.• Make sure to use correct Audio/Video cable, wrong plug connection may cause weak signal.• If you have a stereo VCR, make sure you set it in stereo mode.• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape,the resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.Note:Pressing STOP button is for "function change" between DVD/CD/CD-ROM, USB and/or SD Card mode.• To stop, press STOP button. Pressing button can resume in previous playback position. If STOPbutton is pressed three times, the unit trys to find the content of disc ("LOADING..." is shown), to find thecontent of USB ("READ USB" is shown) and to find the content of SD ("READ CARD" is shown).• To change media (e.g. change DVD/CD/CD-ROM to USB), press STOP twice for function change.• If only DVD/CD/CD-ROM exists, "NO USB/NO CARD" is shown as indication.• Please make sure your USB flash drive or SD card is FAT file system instead of NTFS file system. The DVDunit does not support NTFS file system.A. Connecting a TVIf your TV has audio/video inputs, youcan connect the unit to your TV usingstandard Audio/Video cables.Watching a DVD on your TV1. Turn on the unit.2. Tu r n o n the T V a nd fo ll ow t h einstructions included with it towatch video from external sources.To AUDIO /VIDEO OUTjacksAudio / Video cable(not included)White Red YellowTVWhite Red YellowConnectionsE. Connecting to HDMIHDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection foruse with DVD players, set-top boxes and other digital AV devices.HDMI has the capability to support standard, enhanced or high-definition video plus standard to multi-channelsurround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytesper second (with HDTV signals), one connector (instead of several cables and connectors), and communicationbetween the AV source and AV devices such as DTVs.HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registeredtrademarks of HDMI licensing LLC.For TVs that support it, HDMI can provide the best quality audio and video output (depending on mediasource), and so is the preferred connection type. The HDMI cable (not included) incorporates both audioand video signals, so you will have just one cable running from the unit to your TV. Using the HDMI cable(not included), connect the HDMI OUT jack on your unit to the HDMI IN jack on your TV or HDMI-compatibledisplay.Note:• Connect the cable from the source equipment (HDMI IN) to the rear of this unit (HDMI OUT), be sure toturn off the power and unplug both units from the wall outlet before making any connections.• When using the HDMI cable, do not connect to other analog video outputs.• In DVD mode, press STOP button once to stop DVD playing. In HDMI mode, it reads both video andaudio sources.E - 4The HDMI cable(not included)HDMI jack (on the rear of unit)DRC99370U_ENGLISH IB_May 4.indd 1 2010-5-4 17:21:35

/ 2

Related manuals for RCA DRC99370U