Connections and Setup12 Chapter 1SOUNDON•OFFPRESETSCCINPUT SUB CHWATCH TV FORMATVOL VOLMUTEGO BACK FAVCLEARCH -CH +VOL- VOL +MENU OK INFOHDMI cable• If you're doneconnecting devices toyour TV, go to page 15to complete the InitialSetup.• If you experience HDMIproblems, go to theHDMI Troubleshootingsection on page 31.Connecting the DeviceHigh-Definition Multimedia Interface (HDMI) technology is an uncompressed digital connectionthat carries both video and audio data by way of an integrated mini-plug cable.INPUTbuttonON•OFF buttonDevice with HDMIPbYVideo OutPrHDMI OutLRAudio OutHDMIINPUTHDMI ConnectionThis is an example of a connection using the HDMI jack.*Don't forget: If necessary,connect antenna or cable toget a picture. Go to page 8for instructions.Use these buttonsto view the pictureof the device you’veconnected to the TV.*Using the example of a set-top box:• If your set-top box has an HDMI output jack, connect an HDMI cable.Connect an HDMI cable to the HDMI INPUT on the back of the TV and to the HDMIOut jack on the back of the device.Viewing the Picture from the Connected DeviceThe device in this connection is connected to the HDMI INPUT jack. To view this device:1. Plug in the TV (see page 14 for details) and the device, if they aren't alreadyplugged in.2. Turn on the TV and the device you want to view, for example a set-top box.3. Press the INPUT button on the remote control and press the up or down arrowbutton to highlight HDMI from the input list. Press OK to tune to the input. To goback to viewing TV channels, press the WATCH TV button.