Plug in the TVPlug the end of the power cord into the back of the TV. Plug the other end into a groundedwall outlet. Insert the plug completely into the outlet. Do not plug into an outlet controlled bya light switch.Put Batteries in the Remote• Remove the battery compartment cover from the back of the remote by pushing the taband lifting off the cover.• Insert two fresh batteries. Make sure the polarities (+ and -) are aligned correctly.• Replace the cover.Turn on the TVTurn on your TV by pressing the POWER button on the side of the TV or POWER on theremote control.How to Use the Remote Control toComplete the Initial SetupThe technical term is “Navigation” - how you move through the on-screen menus. The theory is the same throughout the menu screens:highlight your choice and select it.To highlight a menu item, press the arrow buttons on the remote tohighlight one of the items listed on the screen. Use the up or downarrow button to move up or down. Use the right or left arrow buttonto view other selections for a menu choice or to display a sub-menu.More than one selection displays, for example, On...; a menu choicewith a sub-menu displays dots (...).Note: Highlighted means that the menu item stands out fromother menu items on the list (appears darker, brighter, or adifferent color).Connections and SetupArrowsOKbuttonTipsTo access the setup menus manually, press MENU andchoose Setup.Chapter 1 13MENUFAV2 34 5 67 8 910CHCHVOL VOLCLEARINPUTSUB CHOKINFO CC SOUNDZOOM- ZOOM+ PICTURESLEEP GUIDE PRESETSPOWER MUTEGO BACK