28 Chapter 2 Using the remote controlHow to Use the Remote After You’veProgrammed ItOnce the remote has been programmed successfully, you are ready to use it to operate yourdevices.To operate the device:1. Press the appropriate device button (SAT/ AUX or DVD) to set the remote to control thedevice, for example, press DVD to control your DVD player.2. Press ON• OFF to turn the device ON or OFF.3. Use the remote buttons that apply to that device.Modes of OperationThe button corresponding to the mode the remote is in lights up when you press any buttonthat works in that mode. For example, if you’re in TV mode and you press the VOL+ button,the TV button lights up. This tells you that the command to increase the volume is being sentto the TV (and not the satellite receiver, for example).Note: The remotecontrol may not becompatible with allbrands and modelsof devices.