Connections and Setup12 Chapter 1VGA ConnectionThis is an example of a connection using the VGA jacks.AUDIOVGA INPUTVIDEOConnecting the DeviceThis connection allows you to connect to a personal computer.1. If necessary, connect your cable and/or off-air antenna as described onpage 6.2. Connect your monitor cable.Connect one end of a 15-pin monitor cable to the VGA VIDEO jack on the TV and theother end to the PC's video output jack. Note, if your PC's video output isn't 15-pin, you'llneed an adapter that can connect to a 15-pin monitor cable.3. Connect your audio cable.Connect a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8" stereo mini pin) tothe VGA AUDIO jack on the back of the TV and the other end to the Audio Output jack onthe PC.Notes: The maximum resolution is 1024 x 768. Be sure to set your PC to the correctmonitor output setting.To hear sound from the TV while using the PC, press the PRESETS button. Highlight PCSound source and press the right arrow to choose TV tuner.Viewing the PC1. Plug in the TV and the PC, if they aren't already plugged in.2. Turn on the TV and the PC.3. Repeatedly press the INPUT button on the remote control until you see VGA displayed atthe bottom of the TV's screen. To go back to viewing TV channels, use the number buttonsto enter the channel or press CH+ or CH- buttons.1Don't forget: If necessary,connect antenna or cable toget a picture. Go to page 6 forinstructions.32