RCA P52811 User Manual

Contents

19Interactive SetupSet the VCR1 ChannelThe next step lets you set the VCR1 channel. When you set theVCR1 channel, you’re telling the TV what channel to tune towhen you press the VCR1 button on the remote.For example, if you have a VCR connected to the Video 1 inputjacks on the back of the TV, you want the TV to tune to theVideo 1 input channel when you press the VCR1 button. If youdon’t have a VCR1 component connected to the TV, skip this stepor select Not Connected from the VCR1 Channel choice list. (Formore, see Auto Tuning in the Quick Reference section.)SETUPWould you like to use a VCRwith your TV?1 Use TV with a VCR2 Skip this step1. Press MENU to bring up the VCR1 choice list.SET VCR1 CHANNEL1 Not connected2 Channel 33 Channel 44 Video 1 Input5 Video 2 Input2. Point to the choice that matches the way you have your VCRconnected to the TV.If you used the Connections Foldout to hook up your TV, usethe table shown at the right to select the VCR1 channel.3. Press MENU to continue.If you used SelectConnection A Video 1 InputConnection B Video 1 InputConnection C Video 1 InputConnection D Video 1 InputConnection E Not ConnectedConnection F Not ConnectedConnection G Video 2 InputConnection H Channel 3*Connection I Video 2 Input* Or Channel 4, depending on howyour VCR’s 3/4 switch is set.