34Tour of the TVBack PanelINPUT 1 VIDEORL/MONO ANTS-VIDEO AUDIOOUTPUTRLINPUT 2VIDEO RL/MONOINPUT 1 Lets you connect a video component such as a VCR,satellite receiver, DVD player or laserdisc player.L/MONO Provides left audio connection. Or, if you areconnecting a mono component, use the L/MONO input. Theleft audio connector is usually white.RIGHT Provides right audio connection. The right audioconnector is usually red.VIDEO Provides video connection. The video connector isusually yellow.S-VIDEO Lets you connect a component with S-Videocapability, such as an S-video satellite receiver, DVD player orVCR. When using S-Video, make sure to connect the threeaudio/video cables as well as the S-Video connector.INPUT 2 Provides a connection for a second video componentsuch as a VCR, satellite receiver, DVD player or laserdisc player.L/MONO Provides left audio connection. Or, if you areconnecting a mono component, use the L/MONO input. Theleft audio connector is usually white.RIGHT Provides right audio connection. The right audioconnector is usually red.VIDEO Provides video connection. The video connector isusually yellow.ANT (Antenna) Provides connection to a home antenna or cableTV system.If you are connecting a component tothe VIDEO 1 INPUT and you are usingS-Video, remember to connect theregular VIDEO 1 INPUT video cable aswell.Hooking up components isn’t hard,but double-checking the cable andjack connections may help you avoidproblems.