RCA R52WH79 User Manual

Also see for R52WH73: User guide User guide Guide de l'utilisateur

Contents

RCA R52WH79 User Manual Manual pdf 15 page image

Connections & SetupChapter TV + Satellite receiver + VCr1. Connect your VCR to your TV.A. Connect a coaxial cable to the VCR’s antenna output jack and to the ANTENNA/CABLEANALOG INPUT jack on the TV.B. Connect the audio (white and red) cables to the VID2 L/MONO and R audio jacks on theback of the TV and to the Audio Output jacks on the VCR.C. Connect the video cable to the VID2 V (Video) jack on the back of the TV and to the videooutput jack on the VCR.2. Make sure cable or antenna is connected to your VCR.Connect the coaxial cable from your cable outlet or antenna to the antenna input jack on the VCR.3. Connect your Satellite Receiver to your TV.Note: Use the best connection offered by your satellite receiver—if your satellite receiver hascomponent video jacks, connect thoseA. Connect the audio (white and red) cables to the VID1 L/MONO and R audio jacks on theback of the TV and to the audio output jacks on the satellite receiver.B. Connect the video cable to the VID1 V (Video) jack on the back of the TV and to the videooutput jack on the satellite receiver.C. If your satellite receiver has an S-Video jack, connect an S-Video cable (instead of thevideo cable in step B) to the S-VIDEO jack on the TV and to the S-VIDEO output jack onthe satellite receiver.4. Connect the coaxial cable from an off-air antenna to the ANTENNA DIGITAL INPUT jack.Note: Do not connect a digital cable signal to this input.• To review otherconnections, go to thenext page.• If you are doneconnecting devices toyour TV, go to page 18 tocomplete the Initial Setup.• If you want more detailsof the jacks on your TV, goto page 18.