RCA R52WH79 User Manual

Also see for R52WH73: User guide User guide Guide de l'utilisateur

Contents

RCA R52WH79 User Manual Manual pdf 19 page image

Connections & SetupChapter Changing Lists and LabelsThe List & Labels part of the setup lets you edit your channel list and choose orcreate a personal six-character label for each channel.Note: Changing List and Labels can be time consuming. You canchange these at a later time by accessing the Setup menu.1. Press the left or right arrow button to scroll through the channels andchoose the one you want to edit.Note: Labels for digital channels cannot be changed—they comefrom the signal sent by the broadcaster. If you're on a digital channeland you want to switch to an analog channel, press the ANT•CABLEbutton on your remote.2. Press the down arrow to highlight the In channel list option. Press the leftor right arrow button to add (the box is checked) or remove (the box isunchecked) the channel from the list.3. Press the down arrow to highlight the Channel label option. Press the leftor right arrow button to scroll through the available list of 25 most commonlabels. The last option in the list allows you to create your own six-characterlabel for the channel (the first letter of the label is highlighted).4. Press the 1 or 2 number button to change the first letter of the label.5. Press the right arrow to highlight the second letter, then press the 1 or 2number button to change the second letter, etc...6. When you are finished creating your label, press OK. Select Go back to goto the Auto Convergence menu.Automatic ConvergenceYour HDTV’s picture tubes might have been disturbed during delivery or afteryou moved the HDTV, causing the color in your HDTV to be out of alignment.The colors adjust by starting auto convergence.IMPORTANT: Auto convergence works best once the HDTV has warmedup for at least an hour. If you've just unpacked your HDTV, it's a goodidea to repeat the Auto convergence function when the HDTV's beenrunning for at least an hour. See page 51 for more information about Autoconvergence.1. Press OK to begin auto convergence.2. When the auto convergence is complete, the Red center convergence menuappears. The cross in the middle of the screen should be yellow. If it is not,use the arrow buttons to move the red cross to overlap the green cross.Press OK when adjustments are complete.3. The Blue center convergence menu appears with a cyan cross in the middleof the screen. If it is not, use the arrow buttons to move the blue crossto overlap the green cross. Press OK (the TV tunes to the last selected/available channel in the channel list).Go backChannel numberIn channel listChannel label113ESP_ _ _Enter the channel number or use keys.Note:If you're using an HD source (such as a separateHDTV tuner or HDTV satellite receiver) onthe CMP or DVI inputs, you should run Autoconvergence separately for that input as well.Tune to the input you’re using for the HDsource, then go to page 51 for information onAuto convergence.Go backAutomatic convergence ...Press < or > key to launch the automaticconvergence. The process takes about 1 min.Pressing OK before the end will stop theprocess and keep old settings.