RCA RC6001P User Manual

Contents

Connections & Setup12 Chapter 1L RVIDEO INAUDIO INANT INS-VIDEOTVAUDIO OUTL RCABLEOROFF-AIR SIGNALDVDPLAYERVIDEO OUT5.1 CHANNELAUDIO OUTCENTEROPTICAL COAX.12DIGITALAUDIO OUTSURROUNDFRONTMIXEDYPbPrYPbPrR LSUBWOOFERPbS-VIDEOPROG. SCANCOMPONENTCOMPOSITETVDVD12DVD Player + TV with Audio/Video Input Jacks1. Connect the audio cables to the 5.1 CHANNEL AUDIO OUT L (left – white) and R (right – red) jackson the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.2. Connect the video cable.• Basic video connection – Connect the video cable (yellow) to the COMPOSITE jack on the back ofyour DVD Player, and to the Video Input jack on your TV.OR• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TVdoesn’t have S-Video, use the basic video connection listed above.OR• Component video (optional, not shown in illustration) – If your TV has component video (Y, PB, andPR jacks) use video-grade cables for the Y, PB, and PR connections. Note that it is essential to match thecolor coded connectors with a compatible TV. If your TV doesn’t have component video, use the basicvideo connection listed above.Note: If you use this connection, you must change the Video Output in the Displaymenu (see page 42). The default video output is S-video/Composite.3. Connect the AC power cord into an AC outlet.Note: Your cable or off-air connection to the television should not be affected by this connection.Connect your cable or off-air antenna to your television as you normally would. You may need toconsult your television manual for details.Go to page 18