RCA RC6001P User Manual

Contents

Chapter 1 15Connections & SetupDVD Player + TV + VCR + Satellite Receiver1. Connect the audio cables to the 5.1 CHANNEL AUDIO OUT L (left – white) and R (right – red) jackson the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.2. Connect the video cable.• Basic video connection – Connect the video cable (yellow) to the COMPOSITE jack on the back ofyour DVD Player, and to the Video Input jack on your TV.OR• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to theS-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. Ifyour TV doesn’t have S-Video, use the basic video connection listed above.OR• Component video (optional, not shown in illustration) – If your TV has component video (Y, PB, andPR) jacks) use video-grade cables for the Y, PB, and PR connections. Note that it is essential to match thecolor coded connectors with a compatible TV. If your TV doesn’t have component video,use the basic video connection listed above.Note: If you use this connection, you must change the Video Output in the Displaymenu (see page 42). The default video output is S-video/Composite.3. Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input on theVCR.4. Insert the AC power cord into an AC outlet.Go to page 18