RCA RCU403 User Manual

Also see for RCU403 - Universal Remote Control: Code List User guide User manual

Contents

5(OFF)1 2 34 5 67 8 90ON•OFFTV CODEProgram for TV—Direct Entry Method1. Manually turn on the TV.2. Locate the enclosed TV Code List.Find your brand of TV.Note: If your brand isn’t listed, useone of the Code Search methods toprogram this remote control (SeeCode Search on page 8).3. Press and hold the CODE SEARCHkey until the indicator lightilluminates. Then release theCODE SEARCH key.4. Press and release the TV key. Theindicator light blinks and then remains lit.5. Use the number keys to enterthe first code listed for your brand.After you enter a valid three-digitcode, the indicator light turns off.Note: If you enter an invalid code,the LED will flash rapidly for 2seconds. Start over at step 3.6. Aim the remote at your TV and pressthe ON•OFF key. If your TV turnsoff, you have found the correct code.7. Enter the code in the box providedon this page for future reference.8. If your TV doesn’t turn off, repeatsteps 3-6 above, entering the nextcode for your brand.If none of the codes work or yourbrand is not listed, use one of theCode Search methods to program thisremote (See Code Search on page 8).For a description of each key on theremote control, refer to the KeyDescriptions section on page 3-4.In order for the 3 component universal remote to controlyour TV, you must program it with the TV code that matchesyour TV. These instructions explain the preferred method ofprogramming the remote—the Direct Entry method.CODESEARCHINDICATORLIGHT(BLINK)TVRCU403_US_IB_REVB 4/10/03 16:47 Page 5