RCA RCU600 User Manual

Also see for RCU600: User manual

Contents

RCA RCU600 User Manual Manual pdf 6 page image

Program for VCR—Direct Entry Method1. Manually turn on the VCR.2. Locate the enclosed VCR Code List. Find your brandin the VCR Codes.Note: If your brand isn’t listed, use one of the Code Searchmethods to program this remote control. (See section onCode Search on page 10).3. Press and hold the CODE SEARCH key until the indicatorlight illuminates. Then release the CODE SEARCH key.4. Press and release the VCR key. The indicator light blinksand then remains lit.5. Use the number keys on the remote to enter the first codelisted for your brand. After you enter a valid three-digit code,the indicator light turns off.Note: If you enter an invalid code, the LED flashes rapidlyfor two seconds. Start over at step 3.6. Aim the remote at your VCR. Press the ON•OFF key.If your VCR turns off, you have found the correct code.7. Enter the code in the box provided on this page forfuture reference.8. If your VCR does not turn off, repeat steps 3-6 above,entering the next code for your brand.If none of the codes work or your brand is not listed, useone of the Code Search methods to program this remote.(See Code Search section on page 10).In order for the six-component universal remote to control your VCR, you must program it withthe code that matches your VCR. To program your remote to control your VCR, follow these steps:(BLINK)VCR CODE(OFF)1. Manually turn on the DVD/CD system.2. Locate the enclosed DVD or CD Code List.Find your brand in the DVD or CD Codes.Note: If your brand isn’t listed, use one of theCode Search methods to program this remote control.(See section on Code Search on page 10).3. Press and hold the CODE SEARCH key until the indicatorlight illuminates. Then release the CODE SEARCH key.4. Press and release the DVD key. The indicator light blinksand then remains lit.5. Use the number keys on the remote to enter the first codelisted for your brand. After you enter a valid three-digitcode, the indicator light turns off.Note: If you enter an invalid code, the LED flashes rapidlyfor two seconds. Start over at step 3.In order for the six-component universal remote to control your DVD or CD systems, you must programit with the code that matches your component. To program your remote to control your DVD/CD system,follow these steps:(BLINK)Program for DVD/CD Systems—Direct Entry Method6CODESEARCHINDICATORLIGHTCODESEARCHINDICATORLIGHT(OFF)ON•OFFVCRDVD