RCA RCU600RS User Manual

Also see for SystemLink 6 AV RCU600RS: Owner's manual

Contents

9DVD CodesProgramming For DVD1. Manually turn on the DVD System.Find the three digit code for your DVDSystem in the code list below.2. Press and hold the CODE SEARCHbutton until the INDICATOR LIGHTlights, then release the CODE SEARCHbutton.3. Press and release the DVD button(The INDICATOR LIGHT will blinkthen remain lit).4. Enter the code using the NumberButtons.After your code is entered, theINDICATOR LIGHT will turn off. Ifthe code is not valid, the INDICATORLIGHT will blink. Check the code listand repeat process.5. Aim the remote at your DVD Systemand press the ON•OFF button. YourDVD System should turn off.6. If the DVD System responds, no furtherprogramming is required.Note: If your DVD does not respond, try all thecodes for your brand. If the codes do not work,or your brand is not listed, try the Code Searchmethod on page 16.7. Enter your code here for easy reference.Most RCA, GE and ProScan DVD systems will not requireprogramming. Check to see if your DVD System respondsto the remote before you begin programming.(OFF)DVD CODE(BLINK)INDICATORLIGHTON OFFDVDCODESEARCHAiwa ........................................350Hitachi ......................................351JVC....................................161, 352Konka ..............................353, 354Magnavox ................162, 356, 357Mitsubishi ................................163Panasonic ................................355Philips ......................162, 356, 357Pioneer......................................165ProScan ....................................160RCA ..........................................160Sanyo ........................................359Sony ..........................166, 360, 361Toshiba ....................167, 362, 363Zenith ......................................36410Satellite CodesProgramming For DBS System1. Manually turn on DBS System.Find the three digit code for your DBSSystem in the code list below.2. Press and hold the CODE SEARCHbutton until the INDICATOR LIGHTlights, then release the CODESEARCH button.3. Press and release the DBS•SAT button(The INDICATOR LIGHT will blink thenremain lit).4. Enter the code using the NumberButtons.After your code is entered, theINDICATOR LIGHT will turn off. Ifthe code is not valid, the INDICATORLIGHT will blink. Check the code listand repeat process.5. Aim the remote at your DBS Systemand press the ON•OFF button. YourDBS System should turn off.Note: If your DBS System does not respond,try all the codes for your brand. If the codes donot work, or your brand is not listed, try theCode Search method on page 16.6. With your DBS System on, press CH+(CHANNEL UP). If the satellite systemresponds, no further programming isrequired.7. Enter your code here for easy reference.Most RCA, GE and ProScan Satellite systems will not requireprogramming. Check to see if your DBS Satellite Systemresponds to the remote before you begin programming.(OFF)SATELLITE CODE(BLINK)INDICATORLIGHTON OFFAlphastar..................................079Echostar (Dish System) ..........089Echosphere (Dish Net) ..........079GE..............................071, 080, 081Hitachi SYS I............................084Hitachi SYS II ..........................083Hughes ............................077, 090Magnavox ................................085JVC ............................................082Panasonic ................................075Philips ......................................085Primestar ..................................076Proscan ....................071, 080, 081RCA ..........................071, 080, 081Sony ..........................................072Toshiba......................................073Uniden ......................................086DBS•SATCODESEARCH