RCA RLED1530 Instruction Manual

WALL MOUNT INSTALLATIONINSTALLING REMOVING THE BASE STANDWARNING/: The LED D isplay i s v ery f ragile and m ust b e p rotected a t a ll t imes w hen r emoving t he b aseStand.Be sure that no hard or sharp object or anything that could scratch or damage the LED display comes intocontact with it Do NOT exert pressure on the front of the unit at any time because the screen could crack1 Disconnect all cables or cords connected to the unit.2 Lay the unit down on a flat surface with the back side facing up Please make sure to place a softcushioned material such as a pillow or thick piece of foam beneath the screen.3 To remove the base stand loosen screws off the holes then pull downwards to releasethe base stand.,. .. .. ,MOUNTING ON THE WALLNOTERemove the base stand before mounting the unit on the wall.This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3”x3”(75mm x 75mm) mounting kit designed for flat-panel TVs (not supplied). Mount this unit according tothe instructions included in the mounting kit.Length of screw should not exceed 8 mm.113”3”M4