RCA RP5050 - Digital 128 MB Built Manual De L'utilisateur

Unpacking your Player• one voice recorder• one USB dock• two NiMH rechargeable "AAA"batteries• one carrying case• one clip-on micPower SupplyThis player can be operated by twoNiMH "AAA" batteries (included).Installing Batteries (Included)1. Slide the battery compartmentdoor to the bottom and lift up thedoor to open.2. Insert the two supplied NiMHrechargeable “AAA” batterieswith polarities matchingindications.3. Replace the battery compartmentdoor.4. Refer to the battery level indicator( ) on display for batteries level.When the indicator is empty,follow the steps below to rechargethe batteries.Recharging Batteries1. Ensure the two supplied NiMHrechargeable "AAA" batteries areinstalled correctly and the player isoff.2. Connect the USB dock to thecomputer. Then connect yourplayer to the USB dock.3. Recharging begins automatically.It should take about 6 hours tofully recharge 650mAh NiMHbatteries.Using Headphones and ExternalMicrophone• When headphones are connected,the sound output from speakerwill be cut.• When external microphone isconnected, no record can be madefrom the built-in microphone.Switching On and Off the Player• Press to turn on the player tostart playback. The player willenter Function Menu.• Press and hold to turn off theplayer completely.ENBefore You Begin4Warning:You may have to replace thebatteries if you are using non-rechargeable "AAA" batteries other thanthose supplied. If power interruptionexceeds 20 seconds, you will have to resetthe date and time.Note:This player can only recharge NiMHbattery.!RP5050 EN 18/10/06 11:16 AM Page 8